Home / Docs Center / Product Datasheets / Audio Encoder

Audio Encoder

Product Datasheets · HDMI/SDI/CVBS Encoder

Project: Product Datasheet | page_id: 225

Audio Encoding Video Encoder
Model XSWEDR-SAUDIO
Audio Input Interface Standard 3.5mm audio input
Network Audio Output Protocol HTTP-FLV/RTSP/RTMP/UDP-TS/HLS/WS-FLV/WS-RAW
Audio Encoding Format AAC
Audio Encoding Bitrate 16Kbps~256Kbps
Remote Upgrade Supported
Remote Management Supports remote modification of device parameters and remote playback of device recordings
Power Supply DC-12V
Operating Temperature 0~70℃
Dimensions 105x83x31mm
Weight 226g

Product Images

Product Manual Link

In-site Docs Center

Device FAQ

Question Answer
1. Can noise be removed? Partially, but not completely. The encoder only handles audio encoding.
2. Is AAC the only encoding format? Are other formats supported? Yes, other formats are not supported.
3. What is the maximum AAC encoding bitrate? Up to 256K is fine.
4. Is there a one-to-one or one-to-many network transmission device? As long as the audio signal is plugged in, the other end can play the audio. Can two devices transmit over the network without a server? Are one-to-one and one-to-many both fine? Yes. Use two audio encoders, one for encoding and one for decoding. No server is needed. Both one-to-one and one-to-many work fine.
5. Does the audio input need power, or is a microphone enough? Connect directly to line out, for example the audio output of a phone or a mixer.
6. So plugging a microphone in directly will not work, right? The microphone must be one with line out output.
7. There is an SD slot; does it support playback or recording? It supports recording.
8. Can an RCA (lotus head) audio cable be connected? No, it must be converted to 3.5mm first.
9. Are passive pickup microphones supported? Yes.
10. What is the green connector at the back? The green one is the 232 and 485 serial ports, reserved and currently unused and unavailable.
Didn't find what you need?Contact us,Talk to our engineers directly.

Request a Quote

Fill in the form and we will get back with a quote and proposal within 1 business day.

Click "Generate inquiry email" to open your mail client with the body pre-filled. If no mail client is configured, click "Copy" and paste it into webmail — recipient: sunshiyang@xstrive.com.