Home / Docs Center / Product Datasheets / Single 4K HDMI Encoder with Loop-through (WiFi) E21
Single 4K HDMI Encoder with Loop-through (WiFi) E21
Project: Product Specifications | page_id: 1075
| Single-Channel 4K HDMI Encoder with Loop-Out (WiFi) E21 | |
|---|---|
| Model | XSWEDR-SLHDMI （E21） |
| Video Input | 1 x 4k@30 HDMI input interface |
| Video Output | 1 x 4k@30 HDMI loop-out interface, decoding can be customized |
| Audio Input | 1 stereo analog audio input interface / HDMI embedded audio |
| Video Encoding Capability | 3840x2160@30fps/1920x1080p@60fps |
| Network Support | 10/100/1000M adaptive Ethernet, 2.4G WiFi) |
| Network Video Output Protocol | SRT/RTSP/RTMP/RTMPS/UDP-TS/HLS/WS-FLV/WS-RAW/WEBRTC/GB28181 client/ONVIF |
| Output Video Encoding Format | H.264/H.265 |
| Output Audio Encoding Format | AAC |
| Video Encoding Bitrate | 35Kbps~30Mbps |
| Remote Upgrade | Supported |
| Remote Management | Supports remote modification of device parameters; can be used after registration at platform.xstrive.com |
| Power Supply | DC 12V |
| Operating Temperature | -20～75℃ |
| Dimensions | 125x90x29mm |
| Weight | 286.5g |
Product Images
Product Manual Link (Chinese Version)
In-site Docs Center
FAQ
| Question | Answer |
|---|---|
| 1、Can the input 4K video stream be directly converted to a 1080P network video signal? | Yes, the video resolution and bitrate can be adjusted |
| 2、Does OSD support images? | Images in PNG format are supported |
| 3、Can the video stream of this encoder be controlled to start, pause and stop | Yes, there is an RTMP push switch that can control enabling and disabling |
| 4、What is the 4K adaptive bit depth? | 8bit |
| 5、Can it support 1 channel of 1080P 120HZ? | No, it can only support up to 60HZ |
| 6、How many devices can play at the same time on the LAN? | At a bitrate of 2M it is about 15 devices |
| 7、What is the power consumption? | Power consumption is about 2-3W |
Didn't find what you need?Contact us，Talk to our engineers directly.