Home / Docs Center / Product Datasheets / 10-Channel Video Encoder

10-Channel Video Encoder

Product Datasheets · Video Encoder

Project: Product Datasheet | page_id: 145

10-channel Video Encoder
Model XSWTVR-10M10CH
Network Device Discovery ONVIF
Network Video Input Protocol RTSP/RTMP/UDP-TS/HTTP-FLV/HLS/HTTP-TS
Network Video Output Protocol HTTP-FLV/RTSP/RTMP/WS-FLV/WS-RAW/ONVIF/GB28181
Input Video Encoding Format H.264/H.265
Input Audio Encoding Format AAC/G.711/MP3/MP2/AC3
Output Video Encoding Format H.264/H.265
Output Audio Encoding Format AAC
Max Network Video Channels 10
Max Total Bitrate 10Mbit (the actual value varies with the protocol and encoding format)
Recording SD card recording supported
Remote Upgrade Supported
Remote Management Supports remote modification of device parameters and remote playback of device recordings
Dimensions 61x55x30mm
Weight 67g
Power Supply DC-12V
Operating Temperature 0~70℃

Product Images

Product Manual Link (Chinese)

In-site Docs Center

Click here to watch the device usage video introduction

Video Encoder FAQ and Troubleshooting

In-site Docs Center

Device FAQ

Question Answer
1. Can this stream to a self-hosted platform? Yes
2. Can it stream only when someone is watching, to reduce 4G traffic? Yes. Using our streaming platform enables on-demand streaming. The 10-channel video encoder does not support 4G; you can choose a video encoder that supports 4G.
3. Can PTZ cameras that support the ONVIF protocol also be PTZ-controlled on your streaming platform? Yes
4. Can it pull streams and go live without turning on a computer? Yes, as long as you have a streaming address
5. Does the device need to be on the same LAN as the surveillance camera? Yes, they must be on the same LAN
6. Can the management backend be accessed remotely? Yes, you need to use our management platform
7. Is there one that converts to GB28281? Is it OK if I have no national standard ID? My requirement is to convert RTSP streams from unknown manufacturers into ONVIF, Hikvision protocol or the national standard protocol. Can the national standard ID be filled in at will? This one can do it; it will not work without a national standard code; you can, but you must have a national standard ID; the national standard code cannot be filled in at will.
8. Can it be connected to a network video recorder? Yes
9. Is this a 28181 server? No, this is a GB28181 client that can register to a 28181 server
10. Are industrial cameras supported? Gigabit industrial cameras, gigabit? Not supported. The gigabit output is not an RTSP stream; only network cameras that output RTSP streams are supported
11. How is plugin-free recording achieved? How long can it be stored? This model requires an SD card for recording. Recordings are played back via H5. How long it can be stored depends on how large an SD card you use.
12. Can the video encoder be logged in to via ssh? No. The video encoder supports telnet login, and the streaming server supports ssh login, but only customized devices support these.
13. Can intranet penetration tools such as PeanutHull be configured? Is DDNS supported? DDNS is not supported.

10-channel Video Encoder 1 Product UI_Channel Settings

10-channel Video Encoder 2 Network Configuration_Recording Playback

10-channel Video Encoder 3. Password Change_API Authentication

Introduction to Various Video Pull Protocols of the Video Encoder

Introduction to Various Video Protocol Outputs of the Video Encoder

Video Encoder Status Overview and Channel Settings (including how to add a camera)

Introduction to the Video Encoder Scheduled Streaming Function

Introduction to Video Encoder Advanced Network Settings

Introduction to Video Encoder Recording, Scheduled Recording, Recording Playback and Download

Introduction to Video Encoder Audio Settings

Introduction to the Video Encoder Multi-screen Live Function

Introduction to Quick LAN Video Playback

Introduction to Video Encoder Backup and Restore

Video Encoder Serial Port Transparent Transmission and GPS File Download

Didn't find what you need?Contact us,Talk to our engineers directly.

Request a Quote

Fill in the form and we will get back with a quote and proposal within 1 business day.

Click "Generate inquiry email" to open your mail client with the body pre-filled. If no mail client is configured, click "Copy" and paste it into webmail — recipient: sunshiyang@xstrive.com.