Home / Docs Center / Product Datasheets / 4MP PTZ Fixed Camera
4MP PTZ Fixed Camera
Project: Product Datasheet | page_id: 746
| 4MP Camera | ||
|---|---|---|
| Type | Name | Parameters |
| Name and Model | Main Chip | Ingenic T31ZX |
| Sensor | GalaxyCore GC4653 | |
| Capture Parameters | Lens | 4mm (optional 6mm lens for different installation scenarios) |
| Sensor Type | 1/2.7'' 4MP sensor | |
| Minimum Illumination | 0.01lux/F1.2(color) 0.01lux/F1.2(B/W) | |
| Shutter | 1/3 second to 1/100.000 second | |
| Day/Night Switching | ICR infrared cut filter | |
| Video Parameters | Video Compression Standard | H.264/H.265 |
| Compression Output Bitrate | 128Kbps~8000Kbps | |
| Number of Streams | Dual stream | |
| Max Image Size | 2560x1440 | |
| Max Frame Rate | 25FPS | |
| Image Settings | Brightness, contrast, saturation, exposure, vertical flip, horizontal mirror | |
| Audio Parameters | Audio Output | Supported |
| Audio Input | Supported | |
| Network | Access Protocol | ONVIF GB/T28181 |
| Network Protocol | Supports TCP/IP,DHCP,DNS,NTP,RTSP,RTMP live streaming | |
| Wired Network | 1 RJ45 10M/100M Ethernet port | |
| Function | Local Client | Supported |
| Network Access | Supported | |
| Local Upgrade | Supported | |
| OSD Overlay | Supports 2 or more custom areas, supports time display | |
| Storage | Storage Function | Supports memory card up to 512G |
| Recording Download | Supports local and remote recording download | |
| Recording Playback | Supports remote recording playback | |
| Other | Operating Temperature and Humidity | -25℃~50℃, humidity less than 95% |
| Power Supply | DC12V 2A | |
| Power Consumption | 5W MAX | |
| Protection Level | Waterproof IP66, lightning protection | |
| Dimensions | 240x135mm | |
| Weight | 750g |
Product Images

Product Manual Link and PDF Download Address (Chinese Version)
In-site Docs Center
Camera First Use Guide (Chinese Version)
Camera FAQ and Troubleshooting
In-site Docs Center
How to Insert the 4G Card into a Camera
How to Insert the Memory Card into a Bullet Camera
How to Install the Memory Card in a Dome Camera
Camera FAQ
| Question | Answer |
|---|---|
| 1、Does the camera support secondary development? Is there development documentation? | Yes, secondary development based on HTTP APIs is supported. Camera API documentation: In-site Docs Center |
| 2、How does the camera push streams to a self-built server? | The server must first generate an RTMP push address |
| 3、Is it compatible with Hikvision or Dahua DVRs? | Yes |
| 4、Is motion detection alarm supported? We need to remotely call the SDK on the server to obtain motion detection alarm data | Currently not supported; only remote retrieval of video is supported |
| 5、What is the resolution of 4MP? Can it be adjusted? | The main stream is 2560x1440 and the sub stream can support 720P. The resolution can be adjusted |
| 6、What is the power consumption of the camera? How long can a 30000mAH battery last? | Power consumption is about 12V 100ma, lasting about 30 hours |
| 7、Can it take photos periodically and upload them to a cloud server, for example one image per minute automatically uploaded? | This requires customization |
| 8、Is the camera system Android or Linux? | Linux |
| 9、Does the camera have a Bluetooth interface? | A Bluetooth module can be configured |
| 10、Is voice call software provided? | No software is needed for calls. Purchase a camera that supports intercom and open the web page |
| 11、Can recording be enabled and disabled remotely? | Yes |
| 12、Is there photo capture control? | There is no photo capture control, but there is a screenshot function |
| 13、The camera image is upside down. Where can I adjust it in the backend? | In the settings, use image rotation; use whichever setting makes the image upright |
| 14、Is 24-hour recording supported? How many days can be recorded at most? Will it be cleared automatically when full? | 24-hour recording is supported. How many days can be recorded depends on the size of the storage card. When full, it will be cleared because it is loop recording |
| 15、Do the 4G and WiFi versions support wired networks? | Yes |
| 16、Does 4G also support WiFi at the same time? | No, you can only choose one of 4G and WiFi (the SIM card only supports 4G, not 5G; WiFi only supports 2.4G, not 5G) |
| 17、If pushing streams directly to my own server, what requirements does the server need to meet? | It must support the RTMP protocol |
| 18、Do 4G cameras support APN cards? | APN cards are not supported; only ordinary unrestricted cards are supported |
| 19、Can it push streams to a locally deployed streaming server? | Yes |
| 20、Is the power interface DC5.5-2.1? | Yes |
| 21、Are the extra interfaces on the board available? Is IO still available? | There is TTL and IO |
| 22、Is there complete example code for secondary development? How to get the JS code? | Android example code can be provided; for JS API call example code, you can use Chrome to open the web page https://[device IP:9001/ and right-click to view the source code |
| 23、Are there restrictions on 4G cards? Are IoT cards OK? What about directional cards? | Unrestricted cards are supported. IoT cards are OK. For directional cards, you need to communicate with the operator to open these two domains and ports and add them to the whitelist![]() |
| 24、Does the camera support cross-segment WebRTC viewing? | Yes. The protocol needs to be tunneled through the cloud platform. Tunneling supports one terminal for cross-segment viewing. If the tunnel succeeds, no traffic fee is generated. If the tunnel fails, it needs to be relayed through the cloud platform and traffic fees apply, with no limit on the number of terminals |
| 25、Do you have your own cloud service platform? | Yes. (There is also a test link) |
Didn't find what you need?Contact us,Talk to our engineers directly.
