4MP 30fps IP Camera

Project: Product Specification | page_id: 1357

Product Manual Link (Chinese Version)

docs.html

Camera First Use Guide (Chinese Version)

Installation Guide Front.pdf

Camera FAQ and Troubleshooting

In-site Docs Center

How to Insert the 4G Card in the Camera

How to Insert the Memory Card in a Bullet Camera

How to Install the Memory Card in a Dome Camera

[XSTRIVE 8MP Camera Real-World Footage] https://www.bilibili.com/video/BV1FJmbY6EwJ/?share_source=copy_web&vd_source=e7c64d4a317453d4c18f0e83fd7098ff

Camera FAQ

Question	Answer
1. Does the camera support secondary development? Is there a development document?	Yes, secondary development through HTTP interfaces is supported. Camera interface document: doc-258.html
2. How does the camera push streams to a self-built server?	The server needs to generate an RTMP push address first
3. Is it compatible with Hikvision or Dahua NVRs?	Yes
4. Is motion detection alarm supported? We need to remotely call the SDK on the server to obtain motion detection alarm data	Currently not supported; only remote video retrieval is supported
5. What is the power consumption of the camera? How long can a 30000mAh battery last?	The power consumption is about 12V 100mA, which can last about 30 hours
6. Can it take photos and upload them to the cloud server at scheduled times, for example uploading one image per minute automatically?	Customization is required
7. Is the camera system Android or Linux?	Linux
8. Does the camera have a Bluetooth interface?	No
9. Do you provide voice call software?	No software is needed for calls. Just buy a camera that supports intercom (currently the 8MP camera does not support intercom; if you need it, you can buy the 4MP model that supports intercom) and open the webpage
10. Can recording be started and stopped remotely?	Yes
11. Is there photo capture control?	There is no photo capture control, but there is a screenshot function
12. The camera image is upside down. Where can I adjust it in the backend?	There is image rotation in the settings; use whichever orientation looks correct
13. Is 24-hour recording supported? How many days can it record at most? Will it be cleared automatically when full?	24-hour recording is supported. How many days it can record depends on the size of the memory card. When full it will be cleared, because it is loop recording
14. Do the 4G and WiFi versions support wired networks?	Yes
15. Does the 4G version also support WiFi?	No. You can only choose one of 4G or WiFi (the SIM card only supports 4G, not 5G; WiFi only supports 2.4G, not 5G)
16. If pushing the stream directly to my own server, what requirements does the server need?	It needs to support the RTMP protocol
17. Does the 4G camera support APN cards?	APN cards are supported
18. Can it push streams to a locally deployed streaming media server?	Yes
19. Is the power interface DC5.5-2.1?	Yes
20. Are the extra interfaces on the board available? Is IO still available?	There is TTL and there is IO
21. Is there complete sample code for secondary development? How to get the JS code?	Android sample code can be provided; for the JS interface call sample code, you can open the webpage https://[device IP:9001/ in Chrome and right-click to view the source code
22. Are there any restrictions on 4G cards? Are IoT cards OK? What about destination-restricted cards?	Unrestricted cards are supported and IoT cards are OK. For destination-restricted cards, you need to contact the operator to open these two domain names and ports and add them to the whitelist
23. Does the 4MP model support WebRTC?	WebRTC is supported, but WebRTC intercom is not supported
24. Do you have your own cloud service platform?	Yes (there is also a test link)
25. Can the 4G camera push and pull streams?	Our own devices can; other brands cannot, because the 4G network and the pusher are not on the same LAN