Q10 Scenario Guide

Project: Product Specification | page_id: 1744

Q10 Remote Multi-Platform Live Streaming Device Scenario Usage Guide

Target audience: operations content output, sales solution explanation, customer training, pre-sales solution design
Version: V2.0 | Updated: 2026-05-13 | Owner: Wuhan XSTRIVE Technology Co., Ltd.

Scenario 1: 🌍 Remote Live Streaming — The Host Is Indoors, The Camera Is Anywhere in the World

Applicable Customers

• MCN agencies / live streaming guilds (domestic and overseas content collaboration)
• Outdoor event broadcast teams (the host is in the studio, the camera is on site)
• Cultural tourism scenic area operators (scenic area slow live streaming, scenery promotion)
• Multinational enterprises (global press conference/event collaboration)
• News media (remote connection with foreign correspondents)

Working Topology

════════════════════════════════════════════
              Outdoor shooting site
════════════════════════════════════════════

  [DJI camera / action camera / camcorder / phone]
        │
        │   Step 1: Enter the device's "RTMP live settings"
        │   Step 2: Fill in the RTMP push address and key provided by Q10
        │   Step 3: Start streaming
        ↓
  [4G/5G network module] or [wired broadband]
        │
        └────────────────────── Internet ──────────────────────────→ [Q10 cloud platform]


════════════════════════════════════════════
              Indoor host end
════════════════════════════════════════════

  [Computer] ← OBS / Douyin Live Companion / other live streaming software installed
        │
        │   Step 1: Obtain the pull address from the Q10 platform
        │   Step 2: Add a "Media Source" or "Stream Source" in OBS
        │   Step 3: Fill in the pull address and preview to confirm it is normal
        ↓
  [Host] ← Comfortably indoors, performing:
        ├── Real-time commentary on the outdoor picture
        ├── Interacting with viewers' bullet comments
        ├── Switching shots / overlaying picture effects
        └── Pushing the stream to the target live streaming platform (Douyin/Bilibili/YouTube, etc.)

Detailed Deployment Steps

Step 1: Outdoor-end deployment (only needs to be done once)

1. Power on the Q10 device (DC 12V) and connect it to the network (4G/5G module or wired network cable)
2. Log in to the Q10 management platform and obtain the RTMP push address (format: rtmp://server address/stream key)
3. Find the "RTMP Live" option in the settings of the DJI camera / action camera or other shooting device
4. Fill in the Q10 RTMP push address, save it and start streaming
5. Confirm that the device status light shows that streaming is normal

Step 2: Indoor-end setup (host operation)

1. Open OBS (or other live streaming software) on the computer
2. Add a source → select "Media Source" / "Stream Source" → fill in the pull address of the Q10 platform
3. Preview the picture and confirm that the outdoor video is transmitted smoothly
4. Configure the scene layout (subtitles/Logo/picture-in-picture can be overlaid)
5. Click "Start Streaming" and select the target live streaming platform

Core Advantages

Questions Customers Care About Most

Q: What if the outdoor network is poor?
A: Q10 supports 4G/5G network module access, so streaming is possible anywhere with mobile signal coverage. It also supports wired broadband access, which can be selected flexibly according to on-site conditions. The maximum bitrate is 50Mbit, so even a 4G network can guarantee basic picture quality.

Q: How much latency is there? Can interaction be real-time?
A: Latency depends on the network environment. Domestic 4G/5G networks usually have a latency of 2~5 seconds, which can meet the needs of most live streaming interaction. If ultra-low latency (<1 second) is required, it is recommended to use a wired network + USB local mode.

Q: Can it be used abroad? For example, streaming from the US back to China?
A: Yes. Q10 is based on the standard RTMP protocol and is used worldwide. As long as the device has a network abroad, it can push the picture to the Q10 platform, and the host pulls it domestically and pushes it to a domestic live streaming platform. The reverse is also true — if the device is in China and the host is abroad, live streaming still works.

Scenario 2: 📡 Synchronous Multi-Platform Live Streaming — One Capture, Covering All Platforms

Applicable Customers

• Brand marketing departments (press conference distribution across the entire network)
• E-commerce teams (multi-platform synchronized selling)
• Education and training institutions (multi-terminal course live streaming)
• Media organizations (multi-channel broadcasting of events/news)
• Government and enterprise units (multi-platform information release)

Working Topology (USB mode — most commonly used)

[Video source]
│
├── DJI camera (HDMI output)
├── DSLR/mirrorless camera (HDMI output)
├── Camcorder (SDI/HDMI output)
└── Phone (USB/wireless screen casting)
        │
        ↓ [HDMI/USB cable]
    [Q10 live streaming device]
        │  Capture + encoding + distribution into 3 independent UVC streams
        ↓ [USB Type-C cable · wired connection]
    [Computer] ← Must be on the same LAN as Q10
        │
        ├── Open [Device Manager]
        │   └── You will see: 【Q10 UVC Camera #1】
        │               【Q10 UVC Camera #2】
        │               【Q10 UVC Camera #3】  ← 3 virtual cameras
        │
        ├── [Douyin Live Companion] → Select "Q10 UVC Camera #1" → Stream to Douyin ✅
        ├── [Bilibili live tool]  → Select "Q10 UVC Camera #2" → Stream to Bilibili ✅
        └── [Xiaohongshu live tool]→ Select "Q10 UVC Camera #3】→ Stream to Xiaohongshu ✅

        Result: 3 platforms live streaming at the same time, each controlled independently!

USB Mode Operation Steps

1. Hardware connection
   - Connect the video source to the Q10 input interface via an HDMI/USB cable
   - Connect Q10 to the computer via a USB Type-C cable
   - Make sure the computer and Q10 are on the same LAN (under the same router)

2. Driver recognition
   - Windows: Open "Device Manager" → "Imaging devices" → you should see 3 Q10 UVC cameras
   - Mac: Open "System Information" → "Camera" → you should see 3 Q10 devices
   - No driver installation is required; the UVC standard protocol is plug-and-play and driver-free

3. Software configuration
   - Open the first live streaming software (such as Douyin Live Companion) → add a camera → select Q10 Camera #1
   - Open the second live streaming software (such as the Bilibili live tool) → add a camera → select Q10 Camera #2
   - Open the third live streaming software (such as the Xiaohongshu live tool) → add a camera → select Q10 Camera #3
   - Log in to accounts, set titles and start streaming in each software separately

Network Mode Operation Steps (20-channel streaming)

When more than 3 platforms need to stream at the same time, use network mode:

1. Connect Q10 to the network via a network cable or 4G/5G
2. Log in to the Q10 management platform
3. Add streaming targets (up to 20 RTMP addresses)
4. Obtain the push address and key of each platform from the corresponding live streaming backend
5. Start streaming, and Q10 automatically distributes the picture to all targets simultaneously

Core Advantages

Scenario 3: 🎥 Capture Card Mode — Q10 Replaces a Standalone Capture Card

Applicable Customers

• Individual streamers (limited budget, need to capture camera pictures)
• Small studios (DSLR/mirrorless cameras connected to a computer for live streaming)
• Video conference users (HD cameras connected to Zoom/Teams)
• Teachers recording courses (camera pictures captured into course recording software)

Why Can Q10 Replace a Capture Card?

Traditional solution:

[Camera] → [HDMI cable] → [Standalone capture card (¥300~3000)] → [USB cable] → [Computer]
                                    ↑
                              Must buy! Must install a driver! Uncertain compatibility!

Q10 solution:

[Camera] → [HDMI/USB cable] → [Q10] → [USB Type-C cable] → [Computer]
                                ↑
                    Capture card function already built in! UVC driver-free! 3 channels!

Supported Video Source Types

Compatible Software List

Cost Comparison

Scenario 4: 🎬 Combined Application — Remote + Multi-Platform + Capture Card in a Full-Featured Practical Setup

Typical Case: Cross-Border E-Commerce Live Streaming

Requirement: A domestic host wants to broadcast on Douyin, Taobao Live and WeChat Channels at the same time, and the product display picture comes from live shooting in a US warehouse.

Solution:

[US warehouse]
│
├── [Camera] aimed at the product display area
│     ↓ RTMP streaming
├── [Q10 device A] (placed in the US warehouse, connected via 4G)
│     ↓ Cross-ocean Internet transmission
│
[China · Host studio]
│
├── [Computer] running OBS, pulling the remote picture from Q10 device A
│     ↓ USB Type-C
├── [Q10 device B] (local capture card mode)
│     ├── UVC Camera #1 → Douyin Live Companion → Douyin
│     ├── UVC Camera #2 → Taobao live tool → Taobao
│     └── UVC Camera #3 → WeChat Channels tool → WeChat Channels
│
└── [Host] commentating on the live picture of the US warehouse, interacting with viewers on three platforms

Effect: The domestic host sits in the office, displays products from the US warehouse in real time, and broadcasts on three platforms simultaneously.

This usage guide is for reference in operations and sales; please refer to the latest official parameters and functions.